| Q: |
How
do I turn off/on the (OSD) On Screen Display? |
| A: |
Via
the hand held remote. The CP-100 has a set up memory.
You will need the remote to turn it on again. |
| Q: |
Must I use Datavideo’s VDR-3000 when making
CD-s for the CP-100? |
| A: |
No…But
here are three good reasons why you should consider
using it.
(1) The VDR-3000 is
a stand alone system that automatically encodes
incoming video and burns a CD without tying up your
computer or risking system failures if you chose
to do something else (like check your e-mail) with
an internal CD burner. |
| |
(2) Every CD made on the VDR-3000 includes an auto run
file that will let it play back on your pc, without
having to manually turn on the Microsoft viewers. |
| |
(3) The CD-DVD format is easily available on the VDR-3000.
This format is equal to the average compression
rate of a DVD. |
| Q: |
What
happens if we’re watching one track and we
push another button? |
| A: |
The system goes to the track selected by the most
recent button push (contact closure). |
| Q: |
How much information can it hold? |
| |
Please see chart below. |
| |
Format |
Max
650MB |
Quality |
S-VCD
(Standard Format) |
40
Minutes |
352
x 576 @25fps
Bit rate 2.2mb/sec
M-PEG2 Compression
|
|
CD-DVD
(Datavideo Format)
|
18
minutes |
704
x 576 @25fps
Bit rate 4.8 mb/sec
M-PEG2 Compression
|
|
| Q: |
Does
the CP-100 remember the set up configuration? |
| A: |
Yes.
It remembers the last setup change as the next boot
default. |
| Q: |
Can I replace the CD drive myself? |
| A: |
You can replace it with another CD drive and retain
the control features through the DB-9 connector.
You may also replace the drive with a DVD player
drive but you might not have the remote control
features. |
Asia / Pacific 